PLANET CS-1000 User Manual
Page 178
Multi-Homing Security Gateway User’s Manual
Content Blocking:
Select Enable to enable Content Blocking.
Max. Concurrent Sessions:
The maximum concurrent sessions that allows to pass through
CS-1000. 0 means it is unlimited.
QoS:
Select the item listed in the QoS to enable the policy to automatically execute the function
in a certain time and range.
Step 3:
Click OK to add new policy or click Cancel to cancel adding.
Modifying a DMZ To WAN policy:
Step 1:
In the DMZ To WAN window, locate the name of policy desired to be modified and click its
corresponding Modify option in the Configure field.
Step 2:
In the Modify Policy window, fill in new settings.
NOTE:
To change or add selections in the drop-down list, go to the section where the selections are setup.
(Source Address → DMZ of Address; Destination Address →WAN, Service →Pre-defined Service, Custom or
Group under Service.)
Step 3:
Click OK to save modifications or click Cancel to cancel modifications.
Removing a DMZ To WAN Policy:
Step 1.
In the DMZ To WAN window, locate the name of policy desired to be removed and click its
corresponding Remove option in the Configure field.
- 172 -