PLANET CS-1000 - Manual (Page 173)

Multi-Homing Security Gateway User’s Manual
through the Multi-Homing Security Gateway.
Option: Specify the monitoring functions of packets from WAN network to DMZ network
travelling through Multi-Homing Security Gateway.
Configure: Modify settings or remove policies.
Move: This sets the priority of the policies, number 1 being the highest priority.
Adding a new WAN To DMZ Policy:
Step 1: Click the New Entry button and the Add New Policy window will appear.
Step 2: Configure the parameters.
Source Address: Select names of the WAN networks from the drop down list. The drop down
list contains the names of all WAN networks defined in the WAN section of the Address menu.
To create a new source address, please go to the LAN section under the Address menu.
Destination Address: Select the name of the DMZ network from the drop down list. The drop
down list contains the names of the DMZ network created in the Address menu. It will also
contain Mapped IP addresses from the Virtual Server menu that were created for the DMZ
network. To create a new destination address, please go to the Virtual Server menu. (Please
refer to the sections entitled Address and Virtual Server for details)
Service: Select a service from drop down list. The drop down list will contain services defined in
the Custom or Group section under the Service menu. These are services/application that are
allowed to pass from the WAN network to the DMZ network. Choose ANY for all services. To
add or modify these services, please go to the Service menu. (Please refer to the section
entitled Services for details)
- 167 -