PLANET CS-1000 - Manual (Page 115)

Multi-Homing Security Gateway User’s Manual
Step 10. Click Trunk and press New Entry to configure the further setting.
Step 11. Enter Site_A as the new trunk name, and select LAN interface as the VPN source. Fill LAN IP subnet
192.168.10.0 with subnet mask IP 255.255.255.0.
Step 12. In To Destination table, select Remote Client.
Step 13. In Tunnel, select VPN_A tunnel Available Tunnel, and click the Add>> button to add it to the Select
Tunnel .
Step 14. Click OK to finish the Trunk setting of Company A.
Step 15. Enable Trunk setting in Incoming Policy.
- 109 -