Yaskawa Z1000U HVAC Matrix Bypass - Manual (Page 292)

Figure 7.18 Install the Cooling Fan Unit
4.
Guide the cables through the second set of provided hooks to hold the cables in place.
A
B
C
D
A – Cooling fan A
B – Cooling fan B C – Bend three times
D – Bend twice
Figure 7.19 Cooling Fan Wire Routing
5.
Thread the four fan unit screws into the proper holes approximately 2/3 of the way. Leave enough space to reinsert
the fan guard.
A
A –Screw locations
Figure 7.20 Insert Cooling Fan Screws
6.
Insert the fan guard and firmly tighten the screws so they do not come loose.
7.5 Drive Cooling Fans
292 YASKAWA SIEP YAIZ1D 01A Z1000U HVAC MATRIX Drive Bypass Technical Manual