Yaskawa 1000 Series Drive Option - DeviceNet Technical Manual - Manual (Page 5)

1 Preface and Safety
YASKAWA ELECTRIC SIEP C730600 43B 1000-Series Option SI-N3 Technical Manual 5
‹ Registered Trademarks
• DeviceNet is a trademark of the ODVA.
• Trademarks are the property of their respective owners.
‹ Supplemental Safety Information
Read and understand this manual before installing, operating, or servicing this option. Install the option according to this
manual and local codes.
The following conventions indicate safety messages in this manual. Failure to heed these messages could cause fatal
injury or damage products and related equipment and systems.
„ General Safety
DANGER
Indicates a hazardous situation, which, if not avoided, will result in death or serious injury.
W ARNING
Indicates a hazardous situation, which, if not avoided, could result in death or serious injury.
CAUTION
Indicates a hazardous situation, which, if not avoided, could result in minor or moderate injury.
NOTICE
Indicates an equipment damage message.
General Precautions
• The diagrams in this book may include options and drives without covers or safety shields to illustrate details. Be sure to reinstall
covers or shields before operating any devices. Use the option according to the instructions described in this manual.
• Any illustrations, photographs, or examples used in this manual are provided as examples only and may not apply to all products
to which this manual is applicable.
• The products and specifications described in this manual or the content and presentation of the manual may be changed without
notice to improve the product and/or the manual.
• When ordering new copies of the manual, contact a Yaskawa representative or the nearest Yaskawa sales office and provide the
manual number shown on the front cover.
DANGER
Heed the safety messages in this manual.
Failure to comply will result in death or serious injury.
The operating company is responsible for any injuries or equipment damage resulting from failure to heed the warnings
in this manual.