HEIDENHAIN SW 548328-05 - Manual (Page 513)

HEIDENHAIN MANUALplus 620 513
8.2 P
a
ra
met
e
rs
8.2 Parameters
Parameter editor
The parameter values are entered in the configuration editor.
Each parameter object has a name (e.g. CfgDisplayLanguage) that
gives information about the parameters it contains. Each object has a
key for unique identification.
The MANUALplus displays an icon at the beginning of each line in the
parameter tree showing additional information about this line. The
icons have the following meanings:
User parameter (user parameters)
Parameters that are preset for the usual "daily operations" are
organized as User parameters.
To enable you to set machine-specific functions, your machine tool
builder make further parameters available as user parameters.
Editing user parameters
Press soft key and enter the key number 123.
Press the User parameters soft key.
Branch exists but is closed
Branch is open
Empty object, cannot be opened
Initialized machine parameter
Uninitialized (optional) machine parameter
Can be read but not edited
Can neither be read nor edited
Refer to your machine tool manual.