Input stream select, Status, Sample rate convert – Grass Valley Kameleon Series v.5.1.0 User Manual
Page 98: Loss of signal reporting, Reporting, Aes errors
98
Kameleon Series Instruction Manual
KAM-AV and KAM-SD Links and Web Pages
for the following explanations.
Input Stream Select
All available audio inputs are listed on the Audio Input Select web page
with the names defined on the I/O Config web page. For this example,
module default names are used.
Select the desired Stream 1-4 by selecting the corresponding radio button
for that input.
Status
The status of each of the selected inputs is reported as
Present
or
Not Present
.
Sample Rate Convert
On demultiplexed and AES audio inputs, select whether to disable sample
rate conversion on each stream. This does not apply to analog audio inputs.
Loss of Signal Reporting
Enable or disable loss of signal reporting for each stream to higher levels
such as SNMP reporting. This does not apply to analog audio inputs.
Reporting
The Reporting row will display what status is being reported to the higher
levels. When Reporting is unchecked, the display will report
Not Monitored
.
AES Errors
Enable or disable AES error reporting to higher levels. This is not appli-
cable for analog or demultiplexed digital audio signals.