Grass Valley Kameleon Series v.5.1.0 - Manual (Page 46)

46 Kameleon Series Instruction Manual
KAM-AV and KAM-SD Links and Web Pages
Status Web Page
The Status web page for the KAM-AV ( Figure 21 on page 47 ) or KAM-SD
module ( Figure 22 on page 48 ) provides an overall indication of the health
of the system and links to web pages for the active components:
• Status Header – the same on all Kameleon configuration pages (see Web
Page Operations and Functional Elements on page 42 ),
• Color-coded communication status for each component and path,
• Summary of all fault/warning conditions, and
• Textual module status, front module, and submodule properties.
Color-coded Status Indicators and Links
Each box represents a Kameleon module or submodule as indicated in
Figure 21 on page 47 and Figure 22 on page 48 . Arrows represent signal
paths that may or may not be monitored. These elements act as links when
their function is active (indicated by underlined function name).
Color code:
• Green = Pass – operating as expected.
• Yellow = Warning – signal is absent, has errors, or is misconfigured.
• Red = Fault – a component has failed.
• Grey = Not monitored.
• White = Not present.
Status/Front Module Properties
The Status/Front Module properties in the footer provide a textual
summary of the color-coded module status. Front module properties
provide hardware, firmware (different between the KAM-AV and
KAM-SD), software identification, and asset tag number for the KAM-SD
or KAM-AV front processing module. ADC or DAC submodule properties
are also reported if they are installed on the processing module.
Submodule Properties
The Submodule properties in the footer provide a textual summary of the
color-coded submodule status. If the front module has the ADC or DAC
submodule installed, the bottom of the Status web page will display part
number, serial number, and hardware revision for each submodule.
Use
this
link