Grass Valley Kameleon Series v.5.1.0 - Manual (Page 125)

Kameleon Series Instruction Manual 125
Specifications
Frequency response ± 0.2 dB, relative to 1 kHz, 20 Hz to 20 kHz @ +24 dBu
DC offset ± 50 mV
Output resolution 24 bits
Effective number of bits 18
Static withstand 5 kV (330 Ω, 150 pF) any input or output
Table 20. Frame Sync/Timing Specifications
Parameter Value
Video Frame Sync Timing Control Parameters
Delay adjustment (main) 0 to 1 frame in 37 ns steps
Additional delay, composite out 0 to 151µs in 37 ns steps
Fine phase delay, composite out 0 to 37 ns in 100 steps
Additional delay, SDI out 0 to 151 µs in 37 ns steps
Table 21. Main Video Processing Specifications
Parameter Value
Main Video Frame Processing Control Parameters
Y gain ± 50% in 0.4% steps, 100% default
Y offset ± 3.5% of 100% white in 0.11% steps, 0% default
B-Y gain ± 50% in 0.4% steps, 100% default
B-Y offset ± 3.5% of 100% white in 0.11% steps, 0% default
R-Y gain ± 50% in 0.4% steps, 100% default
R-Y offset ± 3.5% of 100% white in 0.11% steps, 0% default
Color bars On/Off
Table 22. Multiplexing/Demultiplexing Specifications
Parameter Value
MUX/DEMUX Performance
Standard SMPTE 272M A, C: Synchronous audio, 48K, 20/24 bits/sample Compati-
ble with buffer sizes down to 48 samples
Pass through Up to 4 groups (frame sync must be in delay mode)
Extract, retime, insert Up to 2 groups
Delete Up to 4 groups
Insert Up to 2 groups
Table 19. Audio DAC Specifications - (continued)
Parameter Value