Grass Valley Kameleon Series v.5.1.0 - Manual (Page 22)

22 Kameleon Series Instruction Manual
Installation
KAM-MIX-R Configurations
The KAM-MIX-R rear I/O module ( Figure 11 ) accepts either SDI or com-
posite video (KAM-AV only). Five BNC connectors are provided—three for
video and two for unbalanced AES/EBU I/O. Six three-terminal audio
connectors are provided— four for analog audio I/O and two for analog or
balanced AES/EBU I/O.
Figure 11. KAM-MIX-R Input/Output Connectors
Table 3 provides the various audio input and output I/O configurations
based on the positioning of the audio ADC and DAC submodules and the
available video outputs.
Figure 5 on page 16 illustrates the relationship of
submodule to rear connector for KAM rear modules. Submodule installa-
tion is shown in
Figure 6 on page 17
Table 3. KAM-MIX-R I/O Configurations
Submodule 1 Submodule 2 Video Input Audio Inputs Audio Outputs Video Output
A to D None
1 SDI or Composite
1
(J11)
1 Only KAM-AV modules support composite video I/O.
4 analog, 2 AES/EBU
balanced or unbalanced
None
1 SDI (J1) and
1 Composite 1 (J6)
D to A None
2 AES/EBU balanced or
unbalanced
4 analog
A to D None 4 analog
2 AES/EBU balanced or
unbalanced
D to A None None
4 analog, 2 AES/EBU
balanced or unbalanced
8173-09r2
J11 VI, SDI or Composite Video In
J10 AN AUD1, Analog Audio In/Out
J9 AN AUD2, Analog Audio In/Out
J8 AN AUD3, Analog Audio In/Out
J7 AN AUD4, Analog Audio In/Out
Audio
Connector
pinout
+ – G
J11
SIG
SIG
SDO
2900
PRM-7
J1 J6 J2 J3 J5 J4 J7 J8 J9 J10
CVO AES
1
AES
2 AN AUD1 AN AUD2 AN AUD3 AN AUD4 AES 1 AES 2
J6 CVO, Composite Video Out
J5 AES1, Unbalanced AES/EBU Audio In/Out
J4 AES2, Unbalanced AES/EBU Audio In/Out
J3 AES1, Balanced AES/EBU Audio In/Out
J2 AES2, Balanced AES/EBU Audio In/Out
J1 SDO, SDI Video Out
AES connector use:
Paired connectors,
must use either
balanced or unbalanced