Grass Valley Kameleon Series v.5.1.0 - Manual (Page 31)

Kameleon Series Instruction Manual 31
Power Up
Power Up
The front LED indicators are illustrated in Figure 16 .
Figure 16. Front and Rear Module Indicator LEDs
A green Signal Present LED can be seen on the Passive Rear Module (PRM)
on all model types when a valid input signal is present.
D1 D2 D3 D4 D5 D6 D7 D8
PWR – Green diagnostic LED on indicates power OK
For factory use.
FAULT – Red diagnostic LED is off during normal operation
Ejector Tab
Processor Module
Front Edge
Passive Rear
Module
COMM – Yellow LED on during remote control communication
CONF – Yellow LED on when module is initializing or processing control data
GND – Digital ground
8173_12
Signal Present LED