Grass Valley Kameleon Series v.5.1.0 - Manual (Page 38)

38 Kameleon Series Instruction Manual
Configuration and Adjustments
Set AES output resolution 20 bit 20 or 24 bit
Audio Proc/
Pair 1 and Pair 2 Ch A’ and Ch B’ and
Pair 3 and Pair 4 Ch A’ and Ch B’
AES Output Resolution
20 bit or 24 bit radio button
N/A
KAM-AV/SD
Set audio mode Audio Audio or Non-Audio
Audio Proc/
Pair 1 and Pair 2 Ch A’ and Ch B’ and
Pair 3 and Pair 4 Ch A’ and Ch B’
Audio Mode
Audio or Non-Audio radio button
N/A
Assign analog audio pairs to
output connectors
– Audio Pairs
Analog Audio Outputs/
J10 & J9 and J8 & J7
radio buttons
N/A
KAM-AV/SD
with
KAM-DAC
Set maximum analog audio
output audio level
+24 dBu
-2 to +24 dBu
(0.1 dB steps) Analog Audio Outputs/
AA Out Ch 1–Ch 4 (dBu)
N/A
Assign AES pairs to output
connectors
– Audio Pairs
AES Outputs/
J4 & J5 (Unbalanced) or
J2 & J3 (Balanced)
radio buttons
N/A KAM-AV/SD
1 This control is valid only for a 525 line rate signal but will still appear in the Newton controls when a 625 line rate is selected. This control is not valid for 625 and should
not be used.
Table 10. Summary of KAM-AV/SD Configuration Controls
Function Default
Range/Choices
Resolution
Web Page/
Function Name
Newton
Panel
Module/
Submodule