Grass Valley Kameleon Series v.5.1.0 - Manual (Page 15)

Kameleon Series Instruction Manual 15
Installation
Module Placement in the Kameleon Frame
There are twelve slot locations in both the front and rear of a 3 RU frame
and four slot locations in a 1 RU frame to accommodate 2000 and Kameleon
Series media modules (audio/video signal handling modules).
The Kameleon media modules consist of a two-module set with a pro-
cessing module and a passive rear module that can be plugged into any of
the frame slot pairs. The rear modules provide the input and output inter-
face connectors.
To install a Kameleon module set in a 2000 Series frame:
1. Locate a vacant slot in the rear of the 3 RU frame ( Figure 2 ) or the
2000T1DNG frame ( Figure 3 ).
Figure 2. 2000T3NG Frame, Rear View
Figure 3. 2000T1DNG Frame, Rear View
2. Insert the passive rear module into the vacant rear slot of the frame as
illustrated in
Figure 4 on page 16 .
Media section
rear slots 1-6
(with three 2000EMI blanks)
Media section
rear slots 7-12
Network
and reference
input connections
Power, frame
configuration,
& frame health
connections
8173-27r1
8173_28
Media section
rear slots 1-2
(with one 2000EMI blank)
J101
1
2
3
4
J102
Media section
rear slots 3-4
Network
and reference
input connections
Power connections