Grass Valley Kameleon Series v.5.1.0 - Manual (Page 64)

64 Kameleon Series Instruction Manual
KAM-AV and KAM-SD Links and Web Pages
VBI Decode Web Page for Composite Input
Use the VBI decode web page ( Figure 33 for 525, Figure 34 on page 65 for
625) to configure the VBI and Data Line decoding of the composite input
signal (KAM-AV only).
The currently detected line rate will be reported. Use the View Selection to
view the page at the correct line rate with the
525 or 625 radio button.
On a line-by-line basis you can remove black level setup (in NTSC video)
and select one of the following three decoding options:
• Blank existing VBI and Data Line information,
• Select Notch Decoding of the composite signal, or
• Pass through decoded VBI and Data Lines (active video lines) informa-
tion as is.
Note The data lines not reserved for carrying data on the previous page will appear
greyed out.
Figure 33. VBI Decode Web Page (Composite Input, 525 Line Rate Shown)
Use
this
link