Grass Valley Kameleon Series v.5.1.0 - Manual (Page 82)

82 Kameleon Series Instruction Manual
KAM-AV and KAM-SD Links and Web Pages
Clear All HANC Data
All horizontal ancillary data can be cleared from the SDI input signal by
selecting the
Clear all HANC data checkbox. The Output Status will then show
all present groups as being deleted ( Figure 50 ).
Figure 50. Clear All HANC Data from SDI Video
24-Bit Audio Warning
The warning “24 Bit Audio in all four groups may exceed data space capa-
bilities” may appear under the Group Deletion section when any of the fol-
lowing conditions occur:
• SDI Video In,
• 525 line video format,
• 24 bit audio format for Mux Group A, or
• 24 bit audio format for Mux Group B.
An example of this is shown in Figure 51 .
Figure 51. 24 Bit Audio Warning