Grass Valley Kameleon Series v.5.1.0 - Manual (Page 123)

Kameleon Series Instruction Manual 123
Specifications
Resolution 10 bits
Accuracy 9.2 bits
Subcarrier jitter < 1 degree when input clock jitter spec is met
Blanking start/end SMPTE170M or CCIR624, non-adjustable
Composite Output Control Parameters
Overall video gain 61% to 138% in 0.5% steps, 100% default
Black range -7.5% to +15% of luma full-scale in 0.1% steps, 0 default
Luma gain 50 – 150% in 1% steps, 100% default
Chroma gain 50 – 150% in 1% steps, 100% default
Hue range ± 22.5 degree 0.5 degree steps, 0 degree default (525 only)
Setup processing in vertical Line by line on/off (525 only)
Vertical blanking processing Line by line blank/unblank
Prefiltering Cross-color & luma reduction 2D filtering on/off
Table 16. AES/EBU Input Specifications
Parameter Value
AES/EBU Input Balanced (AES3-1992) Unbalanced (AES3id 2001)
Common mode range + 10/-10 V, 50 Hz to 20 kHz NA
Differential voltage range 200 mV p-p to 12 V p-p 320 mV p-p to 2 V p-p
1
1 Connector J5 on the KAM-AA-AES-UR specification is 400 mV p-p to 2 V p-p.
Input return loss > 25 dB (100 kHz to 6 MHz) >15 dB (100 kHz to 6 MHz)
Sample rate 32 – 96 kHz 32 – 96 kHz
Performance
Static withstand 5 kV (330
Ω, 150 pF)
Table 17. AES/EBU Output Specifications
Parameter Value
AES/EBU Output Balanced (AES3-1992) Unbalanced (AES3id 2001)
Signal type AES3 1992, 110
Ω
AES3id 2001, 75
Ω
Signal level 3 V p-p ±0.2 V @ 110 Ω 1 V p-p ±0.2 V @ 75 Ω
Rise/fall time 5 ns to 30 ns, 110 Ω load 37 ns ± 7 ns, 75 Ω load
Output return loss > 25 dB (100 kHz to 6 MHz) >15 dB (100 kHz to 6 MHz)
DC offset < 50 mV < 50 mV
Sample rate 48 kHz 48 kHz
Bits/sample 20/24 bits/sample, selectable 20/24 bits/sample, selectable
AES/EBU Performance
Static withstand 5 kV (330 Ω, 150 pF)
Table 15. Composite Output Specifications - (continued)
Parameter Value