Grass Valley Kameleon Series v.5.1.0 - Manual (Page 27)

Kameleon Series Instruction Manual 27
Installation
KAM-AA-MIX-BR Configurations
The KAM-AA-MIX-BR rear I/O module ( Figure 14 ) accepts either SDI or
composite video (KAM-AV only). Four BNC connectors are provided for
video—one video input, one composite output (KAM-AV only), and two
SDI video outputs. Four dual terminal audio connectors are provided for
analog audio input or output I/O. Two dual terminal audio connectors are
provided for balanced input or output AES/EBU I/O.
Figure 14. KAM-AA-MIX-BR Input/Output Connectors
Analog Audio Analog Audio AES
J10
V1
SIG
SDO SDO
KAM-AA
MIX-BR
J1 J2 J3 J4 J5 J6 J7 J8 J9
CVO
8173-37
J10 VI, SDI or Composite Video In
J7, CVO, Composite Video Out
J4, Balanced AES/EBU, In or Out
J1, SDO, SDI Video Out
J2, SDO, SDI Video Out
J9, Analog Audio, In or Out
J6, Analog Audio, In or Out
J5, Analog Audio, In or Out
J8, Analog Audio, In or Out
J3, Balanced AES/EBU, In or Out
Dual Audio
Connector
pinout
+ – G
Analog Audio:
All Inputs or
All Outputs Balanced AES/EBU:
(Four Streams)
All Inputs, All Outputs
or independently selectable
as inputs or outputs.
Connector Use:
2 Identical SDI
Video Outputs