Grass Valley Kameleon Series v.5.1.0 - Manual (Page 26)

26 Kameleon Series Instruction Manual
Installation
Table 6 provides the various audio input and output I/O configurations
and the video outputs for the KAM-AA-AES-UR rear module. Analog
audio input or output configuration depends on the positioning of the
audio ADC and DAC submodules.
Any number of audio inputs can be configured but there is a limit of four
audio output pairs with any configuration.
Table 6. KAM-AA-AES -UR I/O Configurations
Submodule 1
Submodule
2
Video Input
Analog Audio
Inputs/Outputs 1
1 There may be any number of audio inputs but there is a limit of four output audio pairs with any configuration.
AES Audio
Inputs/Outputs 1
Video Output
A to D A to D
1 SDI or Composite
2
(J10)
2 Only KAM-AV modules support composite video I/O.
3 dual analog inputs
(J6 3 , J8, and J9)
3 Analog Audio connector J6 supports only Analog Audio Channels 1 and 2.
4 AES/EBU
unbalanced
BNCs J2-J5
selectable as all inputs,
all outputs,
or independently
selectable as inputs or
outputs on the
I/O Config web page
1 SDI (J1) and 1
Composite
2 (J7)
A to D D to A
2 dual analog inputs (J8 and J9)
and 1 dual analog output (J6 3 )
A to D None 2 dual analog inputs (J8 and J9)
None A to D 1 dual analog input (J6
3
)
D to A D to A
3 dual analog outputs
(J6
3
, J8, and J9)
D to A A to D
2 dual analog outputs (J8 and J9) and
1 dual analog input (J6
3
)
D to A None 2 dual analog outputs (J8 and j9)
None D to A 1 dual analog output (J6
3
)
None None None