Input, Name, Maximum input level – Grass Valley Kameleon Series v.5.1.0 User Manual
Page 94: Signal present, Clipping

94
Kameleon Series Instruction Manual
KAM-AV and KAM-SD Links and Web Pages
Input
The Input column will indicate which rear module connectors are being
used to input the analog audio. Refer to the
Input/Output Configuration Web
for how to configure the analog audio input connectors.
Name
The Name column will report the default input name for these audio con-
nectors or the name given to the inputs by the user.
Maximum Input Level
The maximum input level is adjustable -2.0 to +28 dBu. Kameleon uses this
value to adjust the signal level into the A-to-D converter for the best
signal-to-noise and dynamic range.
Signal Present
A Signal Present status will be reported if the incoming signal is greater
than -40 dBFS.
Clipping
Clipping will be reported when incoming signals are in excess of approxi-
mately 0.5 dB of maximum level.