Grass Valley Kameleon Series v.5.1.0 - Manual (Page 21)

Kameleon Series Instruction Manual 21
Installation
KAM-AA-R Configurations
The KAM-AA-R rear I/O module ( Figure 10 ) accepts either SDI or com-
posite video (KAM-AV only). Three video BNC connectors are provided—
one each for video in, composite video out (KAM-AV only), and SDI video
out. Eight three-terminal audio connectors are provided for analog audio
input or output I/O as determined by placement of the audio conversion
submodules.
Figure 10. KAM-AA-R Input/Output Connectors
Table 2 provides the various audio input and output I/O configurations
based on the positioning of the audio ADC and DAC submodules and the
available video outputs.
Figure 5 on page 16 illustrates the relationship of
submodule to rear connector for KAM rear modules. Submodule installa-
tion is shown in
Figure 6 on page 17 .
Table 2. KAM-AA-R I/O Configurations
Submodule 1 Submodule 2 Video Input Audio Inputs Audio Outputs Video Output
A to D A to D
1 SDI or Composite 1 (J11)
1 Only KAM-AV modules support composite video I/O.
8 analog None
1 SDI (J1) and
1 Composite 1 (J6)
D to A D to A
Demux from
SDI input
8 analog
A to D D to A 4 analog 4 analog
8173-09r2
J11 VI, SDI or Composite Video In
J10 AN AUD1, Analog Audio In/Out
J9 AN AUD2, Analog Audio In/Out
J8 AN AUD3, Analog Audio In/Out
J7 AN AUD4, Analog Audio In/Out
J6 Composite Video Out
J5 AN AUD5, Analog Audio In/Out
J4 AN AUD6, Analog Audio In/Out
J3 AN AUD7, Analog Audio In/Out
J2 AN AUD8, Analog Audio In/Out
J1 SDO, SDI Video Out
Audio
Connector
pinout
+ – G
J11
SIG
SIG
SDO
2900
PRM-7
J1 J6 J2 J3 J5 J4 J7 J8 J9 J10
CVO
AN AUD1 AN AUD2 AN AUD3 AN AUD4 AN AUD5 AN AUD6 AN AUD7 AN AUD8