Grass Valley Kameleon Series v.5.1.0 - Manual (Page 29)

Kameleon Series Instruction Manual 29
Installation
KAM-AA-MIX-UR Configurations
The KAM-AA-MIX-UR rear I/O module ( Figure 15 ) accepts either SDI or
composite video (KAM-AV only). Four BNC connectors are provided for
video—one video input, one composite output (KAM-AV only), and two
SDI video outputs. Four dual terminal audio connectors are provided for
analog audio I/O. A 9-pin Sub D connector is provided for unbalanced
input or output AES I/O from a breakout cable that is included with the
module.
Figure 15. KAM-AA-MIX-UR Input/Output Connectors
Analog Audio Analog Audio AES
J10
V1
SIG
SDO SDO
KAM-AA
MIX-UR
J1 J2 J3 J5 J6 J7 J8 J9
CVO
8173-35
J10 VI, SDI or Composite Video In
J7 CVO, Composite Video Out
J3 Unbalanced AES/EBU Audio In or Out
J1 SDO, SDI Video Out
J2 SDO, SDI Video Out
J9 Analog Audio, In or Out
J6 Analog Audio, In or Out
J5 Analog Audio, In or Out
J8 Analog Audio, In or Out
Dual Audio
Connector
pinout
+ – G
Analog Audio:
All Inputs or
All Outputs Unbalanced AES/EBU:
(Four Sreams)
All Inputs, All Outputs
or independently selectable
as input or output.
Connector Use:
2 Identical SDI
Video Outputs