Grass Valley Kameleon Series v.5.1.0 - Manual (Page 119)

Kameleon Series Instruction Manual 119
Software Updating
6. Open NetConfig.
7. Navigate to the frame containing the KAM-AV or KAM-SD module
you wish to upgrade on the left of the screen in the network tree.
Note If you have not used NetConfig before, refer to the NetConfig Instruction
Manual included during installation in the main NetConfig directory in pdf
format (NetConfig.pdf).
8. Click on the Load SW button on the top of the NetConfig toolbar.
Note Different versions of NetConfig may differ in the software update directory
structure used for accessing software. This manual shows NetConfig version
2.0.6. Refer to the NetConfig manual for the version you are using.
9. This will bring up the Load Software screen ( Figure 77 ).
10. Open the modular directory. The following file name should appear in
the Modular directory:
• KAM-AV-SD (KAM-AV-SD_5.0.1)
Note If the correct file is not present, open the Misc directory and check for it there.
Figure 77. NetConfig Load Software Screen – First .fld Download
11. Find the KAM-AV or KAM-SD modules you wish to update in the
Client Name list. Check the corresponding checkboxes in the window
on the right to indicate you wish to update these devices.
Note For modules running version 2.0.2 software and earlier, refer to the Kameleon
Release Notes for updating instructions.