Vbi data line configuration for sdi output – Grass Valley Kameleon Series v.5.1.0 User Manual
Page 87
Kameleon Series Instruction Manual
87
KAM-AV and KAM-SD Links and Web Pages
VBI Data Line Configuration for SDI Output
Use the VBI SDI web page (
for 525,
for 625
line rate) to configure blanking for the VBI and Data Lines.
•
The currently detected line rate will be reported. Use the View Selection
to view the web page at the correct line rate with the
525
or
625
radio
button.
•
On a line-by-line basis you can blank existing VBI and Data Line infor-
mation by selecting the corresponding checkbox.
•
Check the
Apply Clips to VBI/Data Lines
checkbox to apply the clip values
made with the Video Processor to all of the VBI lines. This control is also
available on the Video Processing web page (
).
Note
The data lines not reserved for carrying data on the Video Input Select web
page will appear grayed out. See
Advanced VBI Configuration on page 72
.
Figure 56. VBI SDI Web Page – 525 Line Rate
Use
this
link
Data lines configured in
Advanced VBI view on
Video Input Select web page