Grass Valley Kameleon Series v.5.1.0 - Manual (Page 116)

116 Kameleon Series Instruction Manual
Software Updating
Software Updating
Software updating of the KAM-AV/SD modules is now done using the
NetConfig Networking Application PC option. This application is avail-
able free of charge from the Thomson Grass Valley web site as described
below. When the Kameleon module is installed in a frame with a 2000NET
module running version 4.0.0 required for this release, the Software Update
web page is no longer present.
Note If you are using a 2000NET card with software earlier than 4.0.0, you may still
use the Software Update page, but NetConfig is recommended in frames
running 2000NET software 3.2.0 and later.
The procedure for updating software with NetConfig is given below. Also
refer to the latest KAM-AV/SD Release Notes for complete details on fea-
tures of the new software release and other important notes about the
release.
Acquiring Software
NetConfig Software
Use the NetConfig Networking application to update all software. The
latest version of the NetConfig Networking application must be at version
2.0.6 for proper operation.
To determine your NetConfig version, open NetConfig click on the About
link on the top of the NetConfig Tool Bar.
If you do not have NetConfig or the latest version, you can download it
from the Thomson Grass Valley ftp site at this URL:
ftp://ftp.thomsongrassvalley.com/pub/router/NetConfig/
Version%202.0.6/
1. Right-click on the NetConfig link to download the zipped file to the
C:\temp folder or other convenient location on your PC.
2. Extract the zipped files onto your local drive:
3. Double-click on the NetConfig.EXE file to install NetConfig.
Note Installing NetConfig into the default location given in the install script
(C:\Programs\Grass Valley Group) is recommended for future NetConfig and
module software updates.