Snmp trap reports link – Grass Valley Kameleon Series v.5.1.0 User Manual
Page 114
114
Kameleon Series Instruction Manual
KAM-AV and KAM-SD Links and Web Pages
SNMP Trap Reports Link
Select the SNMP Trap Reports link to open the 2000NET SNMP Reporting
web page. This link will only be present when SNMP Agent software has
been installed on the 2000NET module. This web page allows configura-
tion of what alarms and warnings are reported to the SNMP management
software.
•
Hardware Switch Status
– the Hardware Switch Status section of this web
page displays the current settings of the alarm and warning configura-
tion DIP switches, S1 and S2, on the 2000NET circuit board in this
frame. These switches allow enabling and disabling of what overall
status reporting information is provided to the SNMP traps.
Note
Slot SNMP traps can be enabled only when the hardware switches for Module
Fault reporting and Asynchronous Status reporting are in enabled on the
2000NET module (dipswitch S1 segment 7 and dipswitch S2 segment 1).
Figure 76. Slot Configuration Web Page