Grass Valley Kameleon Series v.5.1.0 - Manual (Page 50)

50 Kameleon Series Instruction Manual
KAM-AV and KAM-SD Links and Web Pages
Input/Output Configuration Web Page
Use the I/O Config web page to:
• Assign easily recognized signal names that will help later in the config-
uration process, and
• Configure AES audio ports as inputs or outputs, balanced or unbal-
anced.
Figure 23 illustrates the KAM-AA-R Rear module I/O Config web page.
The type of submodule in Position 1 will determine whether Analog Audio
connectors J7-J10 are all inputs or all outputs. The type of submodule in
Position 2 will determine whether Analog Audio connectors J2-J5 are all
inputs or all outputs.
Refer to Table 2 on page 21 for submodule I/O combinations and Figure 10
on page 21 for cabling information.
Figure 23. KAM-AA-R Rear Module Configuration Web Page
Use
this
link