Router destinations, Salvo configuration cross-reference – Grass Valley Imagestore 750 v.3.0.1 User Manual
Page 99
83
Imagestore 750
User Manual
Salvo Configuration Cross-Reference
To use a salvo configuration, the main Imagestore 750 configuration must make reference to it.
Choose ‘Configuration Mode’ in the top right drop-down menu. From System Settings, select
‘Master Control > Master Control Configuration’:
Fig. 5-26: Imagestore Configurator - Configuration Mode, Master Control Configuration
Then select the required salvo configuration file from the drop-down list at the right.,
Save and apply the configuration, and wait for the Imagestore 750 to restart. The salvos will now
be available for the Imagestore 750 to use.
You can reopen existing salvo configuration files to revise them at any time using File >
Open > From Device
... under ‘Salvo Mode’.
Router Destinations
Router Destinations (Feeding Program and Preset Inputs)
on page 64 and
on page 65 for an overview.
In the Imagestore 750 Configurator, select the router destinations that feed:
•
Program bus (the A Input)
•
Preset (a.k.a. preview) bus (the B Input)
•
Aux bus (auxiliary monitoring device)