Grass Valley Imagestore 750 v.3.0.1 - Manual (Page 109)

93
Imagestore 750
User Manual
Fig. 5-37: Imagestore Configurator - Channel Permissions Configuration
Configure the following parameters:
• Channel name. (This is intended to override the panel’s mnemonic, but is not currently
used).
• Permission level.
Set the permission level to 0 to allow panels to use their own ‘allow kick’ and ‘allow share’
settings.
Set the permission level in the range 1–255, otherwise.
• Allow kick.
As for iMC control panels, there are 4 levels of this parameter:
Never
By higher priority panels only
By same or higher priority panels
Always
You can also set this parameter to ‘Use panel setting’. This is the default.
• Allow share:
As for iMC control panels, this setting is either enabled or disabled.
You can also set this parameter to ‘Use panel setting’. This is the default.
Note: If the channel’s permission level is higher than a panel’s permission level, the channel will
override the panel’s ‘Allows Kicking’ and ‘Allow Sharing’ settings. This allows a channel to
enforce a consistency of settings between connected panels, but still allow a supervisor’s panel
to override these standard settings and take control of a channel whenever necessary.
Monitor Wall Configuration
Please see Monitor Wall on page 66 for an overview.