Grass Valley Imagestore 750 v.3.0.1 - Manual (Page 106)

90
Master Control
Software Configuration
Channel ownership and acquisition configuration is carried out mainly in the MCS Panel Config-
uration Editor. A brief overview of the iMC panel configurations is given here. Please refer to iMC
panel publications listed under
Applicable Publications and Tools on page 3 for complete detail.
Channel Selection Configuration
First, decide which Imagestore 750 channel processors are to be controlled by which iMC panels
at your broadcast facility. Then, for each iMC panel, configure an appropriate set of ‘channel
selection’ buttons using the MCS Panel Configuration Editor. Follow these steps:
1 Open the MCS Panel Configuration Editor.
2 Select the iMC panel to configure.
3 Don’t forget to click the ‘Imagestore 750’ radio button in the ‘General’ tab.
4 Select the ‘Channel Selection List’ page:
Fig. 5-34: iMC-Panel Configuration tool - Channel Selection list
Define the channels that are to be controlled by this panel by entering an IP address and
mnemonic. The mnemonic will appear on panel buttons that are related to the channel.