Modes, Configuration mode – Grass Valley Imagestore 750 v.3.0.1 User Manual
Page 172
156
Imagestore 750 Configurator
Modes
‘Metadata’
Create and edit metadata presets.
•
Gain mode
‘Gain’
Create and edit audio gain presets.
•
Shuffle mode
‘Shuffle’
Create and edit audio shuffle presets.
•
Master control mode
‘Channel sources’
Create and edit available channel sources.
‘Source groups’
Create and edit the source groups as viewed on an iMC panel.
•
Salvo mode
‘Router salvos’
Create and edit router salvo information.
•
Macro mode
‘Macros’
Create and edit macros. (See
•
DVE mode
‘DVE mapping’
Create and edit DVE mappings.
Note: There is a main configuration file for the Imagestore 750 and a configuration file for each
mode. Each mode’s file is independent of the main configuration. To use any mode, either open
or create a configuration file in that mode as described under
, following. Mode files must
then be referenced by the main configuration.
Modes
Configuration Mode
The validity of any configuration file depends critically on the hardware capabilities of the
Imagestore 750 and the software options that are currently installed. These are defined in a
capabilities file, which is always available from a running Imagestore 750. The file can also be
saved as a file local to your PC. (See
on page 176.) Configuration
files have the file extension
.xml
. Capabilities files have file extension
.caps
.
After starting the Imagestore 750 Configurator, you should open a configuration file to edit. You
can create a new (default) configuration, or use an existing configuration either from the
Imagestore 750 or from your PC.
Select ‘Configuration Mode’ in the drop-down list at the top right corner of the Imagestore 750
Configurator.
Use the ‘File’ menu as follows:
•
File
>
New
>
From
Device...
Creates a new (default) configuration based on device capabilities from a running Images-
tore 750.
•
File
>
New
>
From
File...
Creates a new (default) configuration based on device capabilities from a
.caps
file on your
PC.
•
File
>
Open
>
From
Device...
Opens an existing configuration from a running Imagestore 750.