Grass Valley Imagestore 750 v.3.0.1 - Manual (Page 229)

213
Front Panel Menu
Appendix A presents the commands of the front panel menu.
The following list shows the hierarchical structure of the Imagestore 750’s front panel menus.
Many menu items are dependent on the presence of one or more licence options.
(Commands at the same indentation can be accessed, at the front panel, by moving the joystick
to the left or right, corresponding to the arrows on the front panel. A command that is indented
relative to the previous command is accessed by moving the joystick down, corresponding to
the word “enter” on the front panel.)
Note: This is a long list. Some items are marked with “Repeats for . . .” to shorten the list.
Status
General Status General system status
Temperature Temperature of the FPGA
PSUA 12V Actual voltage of the 12V PSUA
PSUB 12V Actual voltage of the 12V PSUB
SYS 5V Actual voltage of the 5V supply rail
SYS 3.3V Actual voltage of the 3.3V supply rail
SYS 2.5V Actual voltage of the 2.5V supply rail
SYS 1.8V Actual voltage of the 1.8V supply rail
SYS 1.2V Actual voltage of the 1.2V supply rail
DVE 12V Actual voltage of the 12V supply rail on the DVE card
DVE 2.5V Actual voltage of the 2.5V supply rail on the DVE card
DVE 1.8V Actual voltage of the 1.8V supply rail on the DVE card
DVE 1.2V Actual voltage of the 1.2V supply rail on the DVE card
PSU A Status of the 12V PSUA
PSU B Status of the 12V PSUB
FAN 1 SPEED Speed of the first fan, in RPM
FAN 2 SPEED Speed of the second fan, in RPM
FAN 3 SPEED Speed of the third fan, in RPM
FAN 4 SPEED Speed of the fourth fan, in RPM
FAN 5 SPEED Speed of the fifth fan, in RPM
Timecode Status “LTC” or “VITC” if valid timecode is present; otherwise “BAD-Internl”
“DF” for dropframe; “ND” for no dropframe
“Fwd” or “Bwd” shows LTC direction
Timecode Time “Ext” if valid external time code; “Int” if using internal clock
Ref Status
Ref Source “External Ref” if locked to EXT REF; “SDI A” if locked to A; “Free Running” or “Unknown”
Ext Reference
Ext Ref Status “Locked” if the external reference is valid; “Unlocked” if missing. It does not differentiate
between tri-level (HD) or bi-level (SD) analogue references.
Ext Standard “625 Line”, “525 Line”, “1080i/59.94”, “1080i/50”, “720p/59.94”, “720p/50 or “Unknown” if
not present