Grass Valley Imagestore 750 v.3.0.1 - Manual (Page 5)

v
Imagestore 750
User Manual
Disposal and Recycling Information
Your Miranda equipment comes with at least one lithium button battery (Li-MnO2) located on
the main printed circuit board. The batteries are used for backup and should not need to be
replaced during the lifetime of the equipment.
Before disposing of your Miranda equipment, please remove the battery as follows:
1 Make sure the equipment is unplugged from the power source.
2 Remove the protective cover from your equipment.
3 Gently remove the battery from its casing, using a blunt instrument such as a screwdriver for
leverage if necessary.
4 Dispose of the battery and equipment according to your local environmental laws and
guidelines.
For more information about recycling, please contact Miranda Technologies.
WARNING: Be careful not to short-circuit the batteries by adhering to the appropriate safe
handling practices. Do not dispose of batteries in a fire as they may explode.
Batteries may explode if damaged or overheated. Do not dispose of batteries
as household waste. Do not dismantle, open or shred batteries. Keep batteries
out of the reach of children. In the event of a bettery leak, do not allow battery
liquid to come into contact with skin or eyes. Seek medical help immediately
in case of ingestion, inhalation, skin or eye contact, or suspected exposure to
the contents of an opened battery.