Grass Valley Imagestore 750 v.3.0.1 - Manual (Page 90)

74
Master Control
Software Configuration
Select some or all of the sources that apply to this Imagestore 750. You can revise the list at any
later time.
Save the configuration using the ‘Save’ or ‘Save As’ command from the ‘File’ menu.
The chosen sources now appear in the ‘Channel Sources’ view:
Fig. 5-7: Imagestore Configurator - Channel Sources view
Source names allow iMC panels to represent the router sources in human-readable form on
their LCD buttons. Initially, the name of each source is automatically retrieved from the NV9000
router control system, but you can override names as required:
1 Select the channel source ID to modify.
2 In the right-hand panel, type the source name that you want in the ‘Name’ field.
3 The ‘Name Generator’ field should automatically change from ‘Use name from router’ to
‘User defined name’.
You can select audio gain and audio shuffle presets for each channel source. (See Gain Mode on
page 170 and Shuffle Mode on page 171.) They allow each source to be gain-adjusted or
shuffle-adjusted independently to compensate for any upstream audio faults or peculiarities.
Once you have completed all changes needed for the master control configuration, save it onto
the Imagestore 750 using the ‘Save As > To Device…’ in the ‘File’ menu.
Channel Source Templates
When you want to apply audio gain and shuffle presets repeatedly to different sources, you can
simplify repetitive channel source configuration by using channel source templates.