Grass Valley Imagestore 750 v.3.0.1 - Manual (Page 233)

217
Imagestore 750
User Manual
C
Pass SDI See “A” (above)
Colour Field 1 See “A” (above)
Colour Field 2 See “A” (above)
Colour Field 3 See “A” (above)
Test Pattern 1 See “A” (above)
Test Pattern 2 See “A” (above)
D
Pass SDI See “A” (above)
Colour Field 1 See “A” (above)
Colour Field 2 See “A” (above)
Colour Field 3 See “A” (above)
Test Pattern 1 See “A” (above)
Test Pattern 2 See “A” (above)
Fill-1
Pass SDI See “A” (above)
Colour Field 1 See “A” (above)
Colour Field 2 See “A” (above)
Colour Field 3 See “A” (above)
Test Pattern 1 See “A” (above)
Test Pattern 2 See “A” (above)
Key-1
Pass SDI See “A” (above)
Colour Field 1 See “A” (above)
Colour Field 2 See “A” (above)
Colour Field 3 See “A” (above)
Test Pattern 1 See “A” (above)
Test Pattern 2 See “A” (above)
Fill-2
Pass SDI See “A” (above)
Colour Field 1 See “A” (above)
Colour Field 2 See “A” (above)
Colour Field 3 See “A” (above)
Test Pattern 1 See “A” (above)
Test Pattern 2 See “A” (above)
Key-2
Pass SDI See “A” (above)
Colour Field 1 See “A” (above)
Colour Field 2 See “A” (above)
Colour Field 3 See “A” (above)
Test Pattern 1 See “A” (above)
Test Pattern 2 See “A” (above)
Input Masks
A Allows a rectangular mask to be applied to each physical SDI input by adjusting the Left, Right,
Top and Bottom extent of the mask.
Warning: Setting masks will directly affect the equivalent SDI source, so anything else that uses
that source (for example, the AB Mixer or a DVE Input) will be also affected.
If an input is associated with a color field or test pattern (so that it is not using its SDI input
source), then the image will not be masked. Only the SDI source is masked.
B See “A” (above)
C See “A” (above)
D See “A” (above)