Grass Valley Imagestore 750 v.3.0.1 - Manual (Page 170)

154
Control and Monitoring
Monitoring and Alarms
Status LED
The status LED is located on the front panel of the Imagestore 750 to the right of the joystick.
This single-color (red) LED indicates the overall status of the Imagestore 750 by its illumination
state:
Off = No error Slow flashing = Major error
On = Minor error Fast flashing = Critical error
If there are multiple errors, the LED always shows the most severe error detected.
Note: The status LED is useful during commissioning, but is not suitable as a general status
monitoring method because the Imagestore 750 is likely to be remotely located in an equip-
ment rack. It is for this reason that alarms and associated traps are monitored using SNMP.