Imagestore 750 configurator, Introduction, Configurator mode selection – Grass Valley Imagestore 750 v.3.0.1 User Manual
Page 171: 8 imagestore 750 configurator, Chapter 8, Please see chapter 8, Ee chapter 8), Topics

155
Imagestore 750 Configurator
Chapter 8 provides information regarding the Imagestore 750 Configurator.
Topics
Introduction
The Imagestore 750 is configured using the Imagestore 750 Configurator, version 1.5 or later.
This Windows-based application allows you to control the start-up state of the Imagestore 750.
It will then always restart in a known state.
The Media Conversion Suite (MCS) CD that ships with the Imagestore 750 includes a copy of the
Imagestore 750 Configurator. The Imagestore 750 Configurator is also available from Miranda
Customer Support.
Configurator Mode Selection
The Imagestore 750 Configurator has a number of modes, which are selectable in the drop-
down menu at the top right-hand corner of the application window.
Fig. 8-1: Imagestore 750 Configurator - drop-down Modes menu
Whether a particular mode is available depends on the options you have purchased. For each of
these modes, the Imagestore 750 Configurator displays one or more settings pages (or tabs) as
listed here:
•
Configuration mode
‘System settings’
Create and edit the system configuration for use at startup.
‘Store manager’
Edit the store allocation used by the DSKs.
‘Audio graph’
Create and edit the internal audio routing.
‘Licences’
Shows the licences present in the Imagestore 750.
•
Metadata mode