Grass Valley Imagestore 750 v.3.0.1 - Manual (Page 245)

229
Imagestore 750
User Manual
GPI Out 11 On Selects an event that will trigger GPI OUT 11 to switch on
GPI Out 11 Off Selects an event that will trigger GPI OUT 11 to switch off
GPI Out 12 On Selects an event that will trigger GPI OUT 12 to switch on
GPI Out 12 Off Selects an event that will trigger GPI OUT 12 to switch off
GPI Out 13 On Selects an event that will trigger GPI OUT 13 to switch on
GPI Out 13 Off Selects an event that will trigger GPI OUT 13 to switch off
GPI Out 14 On Selects an event that will trigger GPI OUT 14 to switch on
GPI Out 14 Off Selects an event that will trigger GPI OUT 14 to switch off
GPI Out 15 On Selects an event that will trigger GPI OUT 15 to switch on
GPI Out 15 Off Selects an event that will trigger GPI_OUT_15ccccc to switch off
Show GPI IPs Shows current state of GPI inputs/output pins
Timecode
Timecode Source
LTC Selects LTC as the timeout source
VITC Selects VITC as the timeout source
Timecde Status “LTC” or “VITC” if valid timecode is present; otherwise “BAD-Internl”
“DF” for dropframe; “ND” for no dropframe
“Fwd” or “Bwd” shows LTC direction
Timecde Time “Ext” if valid external time code; “Int” if using internal clock. Timecode time is then shown.
Date/Time
Date Sets the date (internal Real Time Clock date only). Preserved until next restart
Time Sets the time (internal Real Time Clock time only). Preserved until next restart
Time Zone Sets the time zone from GMT (+/-)
Serial Comms
Serial Ports
COM 1
Baud Rate Sets Baud rate for COM 1 (1200, 9600, 19200, 38400, 57600, 115200)
Protocol Sets protocol for COM 1 (Oxtel Automation, Oxtel Slave, Presmaster Automation, ENDEC
1882, TFT EAS 911T, RCP Classic, ST61XX Thermometer)
Serial Type Sets serial type for COM 1 (RS-232, RS-422)
COM 2
Baud Rate See “COM 1” (above)
Protocol See “COM 1” (above)
Serial Type See “COM 1” (above)
COM 3
Baud Rate See “COM 1” (above)
Protocol See “COM 1” (above)
Serial Type See “COM 1” (above)
COM 4
Baud Rate See “COM 1” (above)
Protocol See “COM 1” (above)
Serial Type See “COM 1” (above)
RS232 A
Baud Rate Reserved for future use
Protocol Reserved for future use
Serial Type Reserved for future use
RS232 B
Baud Rate Reserved for future use
Protocol Reserved for future use
Serial Type Reserved for future use