External fill/key settings – Grass Valley Imagestore 750 v.3.0.1 User Manual
Page 104
88
Master Control
Software Configuration
•
Slave fill/key input.
The fill and key port pair on which the slave graphics are received.
•
Slave number of keyers.
The number of slave layers that are supported and that return thumbnails to the iMC panel.
By default, the Intuition XG supports 8 layers.
•
Slave IP address.
The slave’s IP address, used for sending media thumbnails to the iMC panel
The slave’s IP address is also used for command forwarding if network control is preferred to
serial control.
•
Slave type.
Set this field to ‘Intuition XG’ to tell the Imagestore 750 how the slave’s load and cue informa-
tion should be interpreted.
To avoid conflicts in slave load and cue states, you must not use XPlay to control the Intu-
ition XG when it is used in the master control environment.
External Fill/Key Settings
In the Imagestore 750 Configurator, choose the ‘System Settings’ tab under ‘Configuration
Mode’ and open the ‘Video > External Fill/Key > Fill-x/Key-x’ branch of the navigation tree at the
left.
Fig. 5-32: Imagestore Configurator - System Settings
Please refer to
on page 39 for more information about the fields on this page.