Grass Valley Imagestore 750 v.3.0.1 - Manual (Page 149)

133
Imagestore 750
User Manual
Automation Control
Automation commands can be used to change internal metadata source values. The internal
sources of metadata are termed “banks.” There are 4 available banks.
 Note: For details of the Oxtel automation protocol, see the Automation publications listed
under
Applicable Publications and Tools on page 3.
Internal Metadata Sources
Oxtel automation commands starting with “o” are used for controlling internal Dolby metadata
parameters.
 Note: Although many aspects of metadata sources can be controlled individually, it is pref-
erable to prepare a set of required presets beforehand and load them using the ‘oT’
command.
Up-Mix
“Up-mix” is the conversion of 2-channel audio to multi-channel audio. The up-mix audio option
adds integral up-mix capability to the Imagestore 750. It creates a multi-channel-compatible
audio signal from a stereo source using the Linear Acoustic upMAX
TM up-mixing algorithm.
The up-mix audio module provides the following features:
• Stereo to multi-channel audio.
• Up to 4 up-mix modules.
• Linear Acoustic’s upMAX TM up-mix algorithm.
• AutoMAX TM and metadata follow modes.
• Down-mix compatible output.
• Control through Oxtel automation command extensions.
• Configurable in the ‘Audio Graph’ page of the Imagestore 750 Configurator. (See Chapter 8.)
Note: up to 4 Dolby encode, Dolby decode, and Up-Mix audio modules can be installed in
the Imagestore 750 at one time.