Grass Valley Imagestore 750 v.3.0.1 - Manual (Page 95)

79
Imagestore 750
User Manual
You will then be informed how many source groups will be generated. This is a sample:
Fig. 5-20: Imagestore Configurator - Source Groups Created
In the example above, two source groups (Group 1and Group 2) were automatically created
using sources 1–16 and 17–19. The source group mappings can then be modified.
Source group dependencies between the Imagestore 750 configuration and the iMC panel
configurations must be considered. When panels that have different numbers of source buttons
are to be supported by the same channel, a mixture of source group sizes can be defined
accordingly.
For example, 32 sources might require 6 source groups when an iMC-Panel-300 and an iMC-
Panel-200 are used to control the same channel:
Two 16-entry source groups (1–16, 17–32) for the (larger) iMC-Panel-300.
Four 10-entry source groups (1–10, 11–20, 21–30, 31–32) for the (smaller) iMC-Panel-200.
Panels then must be configured to use the appropriate sized source groups.
After you have completed all changes needed for the master control configuration, save the
configuration in the Imagestore 750 using the
File > Save As > To Device... .