Grass Valley Imagestore 750 v.3.0.1 - Manual (Page 100)

84
Master Control
Software Configuration
In the Imagestore 750 Configurator, choose the ‘System Settings’ tab under ‘Configuration
Mode’ and open the ‘Master Control > Router Destinations’ branch of the navigation tree at the
left.
Fig. 5-27: Imagestore Configurator - Master Control, Router Destinations
Choose a router destination from the field at the right of each of these 3 entries.
• ‘Destination feeding PGM bus’ corresponds to the A input of the Imagestore 750.
• ‘Destination feeding PST bus’ corresponds to the B input of the Imagestore 750.
• ‘Destination feeding AUX bus’ corresponds to an auxiliary monitoring device.
When you click the field to make an entry, a list of NV9000 destinations appears:
Fig. 5-28: Imagestore Configurator - NV9000 destinations
Choose one and click ‘OK’.
Do the same for all 3 destinations.
These settings represent a physical video connection between the router and Imagestore 750
and between the router and an auxiliary monitoring device.