Grass Valley Imagestore 750 v.3.0.1 - Manual (Page 187)

171
Imagestore 750
User Manual
Shuffle Mode
When the Imagestore 750 Configurator is in ‘Shuffle Mode’, you can define shuffle presets which
can then dynamically adjust the channel shuffling at various points within the audio mix.
To enter ‘Shuffle Mode’, select it from the drop-down list at the top right corner of the Images-
tore 750 Configurator.
You can then create or edit shuffle preset files by selecting ‘File > New’ or ‘File > Open’. When
you create a shuffle preset file, you must specify the number of channels. The number of inputs
can range from 1 to 48 channels. The number of outputs can range from 1 to 48 channels.
Square and non-square shuffle presets are supported.
To edit the shuffle, click any of the squares in the matrix. Red squares represent a connection.
White squares represent the absence of a connection.
 Be aware that rows are inputs and columns are outputs.
The following example shows a 16×16 shuffle preset:
Fig. 8-11: Imagestore 750 Configurator - Shuffle Mode, Shuffle Preset
This particular preset swaps stereo pairs.
When the preset is complete, you can save it to the Imagestore 750 by selecting ‘File > Save’.
(See
Saving a Configuration on page 175.)
Shuffle presets that are saved to the Imagestore 750 can be used in these audio mixer blocks.
• Audio input program shuffler.
• Audio input preset shuffler.
• Audio output program shuffler.
• Audio program voice-over