Metadata mode – Grass Valley Imagestore 750 v.3.0.1 User Manual
Page 142
126
Advanced Audio
Dolby
After a custom-defined preset is loaded into an internal bank, its values can be over-ridden by
subsequent automation commands. This does not affect the original custom-defined preset,
just the values currently in use.
Fig. 6-17: Imagestore 750 Configurator - Metadata Mode, Metadata presets
Metadata Mode
Some metadata parameters are briefly described here. For a full description of Dolby metadata,
refer to Dolby Labs’ metadata documentation:
•
SMPTE RDD 6-2008, Description and Guide to the Use of the Dolby E Audio Metadata Serial Bit-
stream.
•
Dolby Labs’ Metadata Guide.
The following parameters are found on the main left-hand pane of the Configuration Tool when
in Metadata Mode.
•
‘Type’
This specifies which type of Dolby metadata is to be generated:
•
‘Config’
This specifies the program configuration option. Available program configuration options
are listed completely in
Note: This option is enabled only for Dolby E.
Dolby E
Professional metadata
Dolby Digital
Consumer metadata