Grass Valley iMC-Panel-100 v.7.2.9.0 - Manual (Page 90)

78
Menus
Program Input Audio Menu
Program Input Audio Menu
Figure 5-16 shows the panel’s ‘Program Input Audio’ menu:
Fig. 5-16: PGM In Audio Menu
The ‘Program Input Audio’ menu and the ‘Preset Input Audio’ menu control the Imagestore
750’s audio input.
The control at the bottom of the screen adjusts the master audio level of program input. To
adjust this parameter, click or touch the knob proxy associated with the green asterisk in the
control box. Then either click or touch the keypad icon to access a large keypad with which to
enter a number, use the slider, or use the scroll/set knob to adjust the main level. (The scroll/set
knob does not become enabled until you click or touch the knob proxy.)
Buttons
The ‘Main Menu’ button returns you to the main menu.
The ‘Shuffles’ button accesses the ‘Audio Channel Shuffle’ sub-menu (for program input audio).
The ‘Gains Mutes’ button accesses the ‘Gains and Mutes’ sub-menu (for program input audio).
The ‘Phase Inverts’ button accesses the ‘Phase Inverts’ sub-menu (for program input audio).
S The term phase is a misnomer. Phase has nothing to do with signal inversion.
The ‘Set All Levels to Unity’ sets each of the 16 audio channels to unity gain.
The ‘Restore Shuffle to Config’ button reverts the shuffle to that which was defined in the Imag-
estore 750 configuration.
The ‘Restore Gain to Config’ button reverts the audio channels’ gains to those that were defined
in the Imagestore 750 configuration.
The ‘Shuffle Presets’ button accesses a ‘Shuffle Presets’ sub-menu (for program input audio).
The ‘Gains Presets’ button accesses a ‘Gain Presets’ sub-menu (for program input audio).