Grass Valley iMC-Panel-100 v.7.2.9.0 - Manual (Page 63)

51
iMC-Panel-100
Operator’s Guide (for Imagestore 750s)
1 If the stand is attached to the display, remove it. (There are 4 mounting screws. See the fol-
lowing figures.)
2 Using finger pressure, slide the cover of the wiring recess down to remove it:
The wiring recess and the 4 mounting holes are now exposed.
Attach the monitor to your mounting fixture. The mounting holes are tapped for M4 screws
and are 11 mm deep. Use screws of a length appropriate for your mounting fixture.
The monitor has cooling vents at the rear. You should not block the vents.
Remove 4 screws
Remove the cover of the
wiring recess
Recess for Connectors
3.94
[100.0]
3.94
[100.0]