Grass Valley iMC-Panel-100 v.7.2.9.0 - Manual (Page 43)

31
iMC-Panel-100
Operator’s Guide (for Imagestore 750s)
Audio Monitoring
Figure 3-9 shows the monitor section in which there are 2 knobs and 2 LEDs:
Fig. 3-9: Audio Monitor Section
The audio monitor knobs are not used for panels controlling Imagestore 750s, but they are used
for panels controlling MCEs or MCPMs.
Preset and Program Buttons
The preset and program buttons, on the button panel, are each divided into two parts:
1 Source buttons.
The leftmost buttons represent sources only.
Source buttons are usually green, high-tally when selected and low-tally when not. If a
source has a problem (e.g., LOS or non-sync), it is high-tally amber when unselected and red
when selected. Unused source buttons are dark.
The panel can be configured so that buttons for selected main sources are green, white, yel-
low, or red. Unselected main source buttons can also be green, white, yellow, or red.
2 “Layer” buttons.
The rightmost buttons can be configured as video effects, and voice-overs:
For the Imagestore 750, the layer section provides up to 4 DSKs, 4 DVEs, 8 XG layers, and 2
voice-overs (voice-overs).
For the LGK-3901 and ISM-3901, the layer section provides up to 5 DSKs, 8 XG layers, and 2
voice-overs (voice-overs).