Grass Valley iMC-Panel-100 v.7.2.9.0 - Manual (Page 161)

149
iMC-Panel-100
Operator’s Guide (for Imagestore 750s)
Working with the Aux Buttons
The aux/user button row comprises a number of main source buttons and some number of
configurable function buttons. The main source buttons are exactly identical to the sources of
the preset and program button rows. They control the router sources that can be routed to an
auxiliary device such as a waveform monitor.
The auxiliary device is optional.
If your master control system has an auxiliary device, simply press any main source button of the
aux/user row to direct the source signal to the device.
‘Aux Bus Follow’
Imagestore 750s in the master control system have an ‘Aux Bus Follow’ option. This option has 3
choices: ‘none’, ‘PGM’, or ‘PST:
When the option is ‘PGM’, the aux bus “follows” the program bus. That means that whatever
source you select on the program bus is also selected on the aux bus.
When the option is ‘PST’, the aux bus “follows” the preset bus and whatever source you select on
the preset bus is also selected on the aux bus.
When the option is ‘none’, the aux bus does not “follow” either bus and operates normally.
Note that when the option is ‘PGM’ or ‘PST’, you can still use the aux buttons, normally, to switch
sources to your aux output.
Using the Panel Menu
From the main menu, press ‘Panel Settings’ to display the ‘Panel Info’ menu.