Grass Valley iMC-Panel-100 v.7.2.9.0 - Manual (Page 74)

62
Menus
Main Menu
• Voice over control
The two buttons in this section access the voice-over 1 and voice-over 2 menus. The button
becomes highlighted (in purple) when the corresponding voice-over is on program output.
See
Voice-Over Menus on page 90.
• Audio Meters
The meters in this portion of the screen show the audio levels of the designated audio
source which can be selected in the audio meters menu. See
Audio Meters Menu on
page 64.
Click or touch the meters section to access the audio meters menu.
• Intuition XG, XG layers and Layer groups.
The button on the left, labeled ‘Intuition XG Layer Control’, accesses the XG Keyer Layers
Menu (page 96).
The two buttons on the right, labeled ‘XG Lyr 1–4’ and ‘XG Lyr 5–8’ cause the 4 middle but-
tons at the bottom of the screen to represent XG layers 1–4 or 5–8.
The 4 middle buttons at the bottom represent XG layers.
• DSK controls
Each of the 4 ‘Imagestore DSK’ buttons in the middle of the screen accesses a DSK browser
menu. See
DSK Menus on page 71.
• Miscellaneous controls
The ‘Output Gain’ button accesses the ‘Program Output Audio’ menu. See Program Output
Audio Menu on page 82.
The ‘FTS’ button is a status button that turns red when the channel’s program output is in
silence, fading to silence, or fading up from silence.
The ‘FTB’ button is a status button that turns red when the channel’s program output is in
black/silence, fading to black/silence, or fading up from black/silence.
The ‘Panel Settings’ button accesses the panel menu. See Panel Menu on page 104.
The ‘Channels’ button accesses the channel selection menu. See Channel Select Menu on
page 67.