Grass Valley iMC-Panel-100 v.7.2.9.0 - Manual (Page 29)

17
iMC-Panel-100
Operator’s Guide (for Imagestore 750s)
The iMC-Panel-100 has two audio monitor knobs, but they are not used when the panel is
controlling an Imagestore 750s.
• Audio channel control.
The Imagestore 750 processes 16 audio channels.
The Imagestore 750 has 5 audio sections: program input audio, program output audio, pre-
set input audio, and voice-over 1 audio and voice-over 2 audio. The Imagestore 750 has gain
control, inversion, and 16-channel shuffles for each of these 5 sections.
The iMC-Panel-100 has 3 knobs for program audio output, preset audio input, and voice-
over level. (These are live controls.)
• Panel lock. You can use a ‘Panel Lock’ button to prevent accidental changes to the panel set-
tings.
• Automation control. You can enable or inhibit automation with a button press. There are 4
automation assist functions, such as ‘Cue Next’ and ‘Skip Next’.
• Source groups. The iMC-Panel-100 can have up to 16 source buttons. The Imagestore 750
allows the definition of multiple source groups. Each of those source groups can be mapped
to the source buttons of the iMC-Panel-100. The sources in a group are selected from the
sources defined in the NV9000 system. Thus, all NV9000 sources are potentially accessible.
• Configurable source button color. The panel’s source buttons can be assigned two colors,
one color for the selected state of the button and another color for the unselected state. All
source buttons of the panel use the same coloring. The choice of colors is green, white, yel-
low, or red.