Grass Valley iMC-Panel-100 v.7.2.9.0 - Manual (Page 137)

125
iMC-Panel-100
Operator’s Guide (for Imagestore 750s)
Key Options
The top 3 buttons are toggles:
• Key source — toggles between ‘Key’ and ‘Self’. Self-keys do not use a separate key input. The
key values are derived from the chroma values of the fill source.
• Key mode — full or linear.
• Key sense — normal or inverted.
Refer to the Imagestore 750 Reference Manual for definitions of these options.
Position, Size, and Crop
Press ‘Position Size Crop’ to access a menu in which to change the key’s position or crop bound-
aries. The ‘DSK Position, Size, Crop’ sub-menu appears:
Fig. 6-2: DSK Position, Size, Crop Settings (Sample)
There are 4 adjustment buttons in this sub-menu:
• Adjust position.
• Adjust crop.
• Zero position.
• Clear crop.
Position
Either (1) press ‘Adjust Position’ modify the position of the DSK on the screen, (2) press ‘Zero
Position’ to reset its position to (0,0), or use the X and Y controls at the bottom of the window to
enter a position. (Press the keypad icon to enter a number with a keypad or use the knob proxy
next to the parameter’s green asterisk.) The coordinate you choose is of the upper left corner of
the DSK.